Voice and Data Cabling - Network cabling carries the lifeblood of your organizations information. To minimize expensive data network problems, Aonica Infrastructure Solutions follows strict installation and testing guidelines.
Coax Cabling - A critical piece of the infrastructure puzzle for our customers. Coax has been the medium of choice for high fidelity audio, television, satellite and broadband communications.
Video Cabling - Video cabling can be closely associated with coaxial cable, because most video applications require coax, but we also install twisted pair cable for certain video applications.
Twisted Pair Cabling - Unshielded Twisted Pair has been designed for use in voice applications and local area networks. Because of the relatively low cost, this cable is widely used and is available in several different performance categories.
Fiber Optic Cabling - We install, terminate and test multi-mode and single-mode fiber. We've kept abreast of advances in the manufacture, termination and testing standards of fiber optic cable.
Data Center Cabling - Because the server room is the centralized brain of your structured cabling system, we take special care to design and install it according to the highest standards.
Voice and Data Cabling
Cat 5, Cat 6 and CAT 7 Cable
Today, your network cabling system carries the lifeblood of your organization - information. The installation, material, quality of cable and testing procedures are all much more critical in data wiring than in voice. The main reason for this is that networks today are designed to carry large amounts of information at incredible speeds . To accomplish this over unshielded twisted pair cable (UTP), many different criterion must be met.
As we've seen network speeds increase from 10 Mbits per second, over Cat 3 UTP, back in 1991 up to 1Gbit/s (for Cat 7) today the cabling installation has become the critical component of the network. With bandwidth increasing and reliance on the network at an all time high, getting information to where it needs to be is becoming more challenging than ever. Ask any IT Manager what their most common network problem is and you will most likely hear them rant about cabling issues. In fact, cabling problems, which account for over 50% of network problems, cost companies millions annually. The most common problems are:
Low attenuation
Poor NEXT (near-end crosstalk)
Poor ACR (attenuation-to-crosstalk ratio)
Poor delay skew (data arrives at different times)
Impedance
Poor return loss (also known as "echo")
Poor ELFEXT (equal-level far-end crosstalk) numbers for cable, connecting hardware and channel
Splices in cable
Mis-labeled cables
All of these problems can be avoided if the cabling is installed and tested properly. The cable must be installed following strict and specific guidelines and the testing must be done using the right equipment calibrated for the latest standards (certification). Aonica fully tests and characterises each link in the cabling installation The measured characteristics of each link are documented in a test sheet for that link. As a result of this, Aonica are able to give a 25 year waranty on every installation.
